How to Untangle a Chainsaw Chain » Residence Style
Information about How to Untangle a Chainsaw Chain » Residence Style
A chainsaw chain does not have a blade but instead has sharp teeth. It may get tangled when storing, making it difficult to untangle a chainsaw chain.
Every chainsaw owner knows how tangled the chain can become when it tangles. In most cases, this will happen if you remove the chain from your saw for storage. Even a newbie could handle an unfortunate tangle situation with the information below.
Six Easy Steps to Untangle Chainsaw Chain
Using the best 20 inch chainsaw chain can minimize the risk of the chain becoming tangled. But if you do happen to undo your chainsaw, here is how you can untangle the chain.
The following is a quick guide on how to untangle the chain in the shortest amount of time. So keep focus and follow these steps carefully to save yourself the trouble.
Step 1: Prepare the Necessary Materials
At first, you will need the following items to complete the process:
- A Strong Table
- A pair of chainsaw gloves
- Liquid Lubricant
- Goggles to protect your eyes
Step 2: Preparing the Chainsaw
Unplug your chainsaw from the power supply. Use a screwdriver to remove the bar nuts behind your saw’s chain cover with the gloves on.
Remove your chainsaw’s bar and pull out the chain. If you have a wooden-handled chainsaw, remove the handle from the motor housing.
Step 3: Identify Two Opposing Loops
When looking at the chain, you will see two opposing loops. Hold the chain with these loops parallel to the ground with gloves on.
Then, looking at the chain from the side, identify the two links on the top of the loops.
Step 4: Expanding the Loops
Place your chainsaw on a flat, sturdy surface. If possible, place the saw on an old workbench or table that won’t tip over when weight is put on it.
Check the distance between the two opposing loops of the chain.
If they are too close together to fit your hand in between, release them by gripping both loops with pliers and gently pulling them apart.
If the loops are too far apart and there is still tension on the chain, you can use a hammer to tap the links together lightly.
Step 5: Untangle the Chain Links
Now that the loops are expanded, you can easily work on the chain links. With your fingers, carefully untangle any knotted links until there are no more tangles.
Another method to untangle the chain is by using a pair of locking pliers. Using the tool, grab both sides of a knot and slowly pull it apart while making sure not to break any segments in between.
Step 6: Reassembling Chain on Bar
Once you have successfully untangled the chain, reattach it to the bar and tighten the bar nuts. If you have a wooden-handled chainsaw, replace the handle on the motor housing and secure it with screws.
Finally, apply a drop of chain lubricant to each link. Wipe off any excess lubricant and put your chainsaw away.
With these advised steps, you will have your chainsaw up and running once more. However, if you do it incorrectly, you could damage your saw’s chain or the locking mechanism of the bar nuts.
So if you’re unsure how to do it yourself, find someone who can assist you in the process.
A Guide to Maintaining Chainsaw Chains
By following the simple guides below, you’re well on your way to keeping your best echo chainsaw running like new.
Chainsaw Chain Lubricated
A well-lubricated chainsaw chain will not only make your saw perform better but will also prevent premature wear and tear. Lubricate a chainsaw chain by dripping some bar and chain oil over the drive links and pinion gear.
Sharpen Your Chainsaw Chain
A sharp chainsaw chain is a key to a safe and efficient cut. Dull blades can cause the saw to bind and increase your chances of kickback. A chainsaw chain should be sharpened every time you use it or at least every other time.
Chain Tensioned Correctly
A chainsaw that is tensioned correctly will cut smoothly and with less vibration. Chainsaw chains are typically tensioned at the factory, but over time and with use, they may need to be re-tensioned.
Check the Depth Gauge Setting
Every time you replace a saw chain, the depth gauge should be set to your particular application. After replacing a chainsaw chain, always check this setting before using it.
With these four simple guides in mind, you can have a fully operational and well-maintained chainsaw that will get the job done safely and efficiently.
Tangling a Chainsaw Chain Causes
Tangling a chainsaw chain can be caused by a number of things, such as not lubricating the chain often enough, using the wrong type of lubricant, or not keeping the chain sharp.
Another common cause of chainsaw chain tangling is when the chain is too tight or too loose on the bar. If the chain is too tight, it will put pressure on the bar’s bearings making them wear out prematurely.
Untangling or Maintaining Chainsaw Chain: Precautions
Every chainsaw is different, so always consult your chainsaw’s user manual for proper chain untangling or maintenance instructions. To avoid injury follow these simple precautions:
- Always wear gloves, safety goggles, and a dust mask when working on your chainsaw.
- Make sure the chainsaw is turned off and unplugged before working on it.
- Do not over-tighten the bar nuts. This can cause damage to the saw’s chain or locking mechanism.
- Always work on a level, sturdy surface. If necessary, use heavy objects to secure the saw while working on it.
You can safely untangle or maintain your chainsaw chain without any incident by following these simple precautions.
A chainsaw chain is a vital link for getting work done. Even the slightest tangling of your saw’s chain can put you out of commission and make your home improvement project extremely difficult to complete.
By following these simple steps and the information in the entire article, you can untangle or maintain your chainsaw chain in no time. I hope you enjoyed the article.